A tiny little 4 speed gearbox without reverse. I usually build compact super cars, until I manage to build a small 5+R gearbox I'll have to use this design. If you have any questions or ideas please contact me!

Details:
-Assuming that it's a rear wheel drive car, blue joiner should be connected to the engine and white joiner should be connected to the differential.

Problems:
-24 tooth gear is so big and it won't allow me to build a small frame around the gearbox. I'd like to build a 7 stud wide frame but that gear rubs the liftarms so I I have to make it 9 stud wide.
-Engine and wheel connections are not centered so I have to use extra gears to line them. Even though they function pretty good, this means more friction. I could place the gearbox one stud to the left (or right) but then it's not symmetrical, it kills me!

Contact:
http://legoadam.turklug.com/iletisim.html

Links:
http://brickforge.de/software/brickstore/ - you need Brickstore to view the .bsx (inventory) file.
http://www.leocad.org/ - you need LeoCAD to view the .lcd file

Warning:
-This design has been used by Erik Leppen* and Sariel** before. Please see their folders too.

* http://www.brickshelf.com/cgi-bin/gallery.cgi?m=ErikLeppen
** http://www.brickshelf.com/cgi-bin/gallery.cgi?m=Sariel